61 31 342 Removing and installing/replacing the gear selector switch (GWS)

Special tools required:

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary work:

Removal:

Release all screws (1).

Take off gear selector switch (2) from center console (3).

Unlock and disconnect corresponding connector.

Fig 1: Identifying Gear Selector Switch, Center Console And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Installation note:

Align gear selector switch (2) centrally.

Connect corresponding connector.

Join gear selector switch (2) to center console (3).

Tighten all screws (1).

Tightening torque 61 31 1AZ .

Fig 2: Identifying Gear Selector Switch, Center Console And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: