61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation
Special tools required:
WARNING:
Read and comply with SAFETY REGULATIONS
for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary work:
- Disconnect BATTERY EARTH LEAD
Carefully lever out side cover (1) with special tool 00 9 323 .
Disconnect plug connection (1).
Unlock latch mechanisms (4) in direction of arrow.
Feed switch for front passenger airbag deactivation (2) out of side cover (3).
Installation note:
Make sure switch for passenger airbag deactivation (2) is correctly seated in side cover (3).