51 42 019 Removing and installing or replacing door handle on door trim panel, rear left or right
Special tools required:
When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).
Necessary preliminary work:
- Remove REAR DOOR TRIM PANEL
Undo screws (3) and (4).
Release retaining hook at upper and lower dome of handle (2).
Feed handle outwards out of door trim panel (1).
Installation note:
Retaining catches (1) on handle (2) must not be damaged or missing.
Replacement
- Reinstall retaining clips (3) for handle trim cover