51 21 330 Removing and installing/replacing weather strip on inner front door

Necessary preliminary tasks:

Lever out cover (1) at rear slightly.

Start at rear with removal of weather strip (2).

Fig 1: Removing Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off weather strip (1) towards top.

Installation note:

Replace faulty clamps (3).

Note that the first clamp differs from the others (3).

Insert weather strip (1) below cover (2) at front.

Fig 2: Inserting Window Cavity Cover Strip Below Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, moisten weather strip (1) prior to installation with APPROVED LUBRICANT .

Start with installation at front.

Fig 3: Identifying Weather Strip

Courtesy of BMW OF NORTH AMERICA, INC.