51 47 030 Removing and installing/replacing rear (inside) left or right door sill cover strip

Special tools required:

Necessary preliminary tasks:

Release expansion rivet (1).

Release clips (2) on door sill cover strip (3) with special tool 00 9 317 .

Pull door sill cover strip (3) up and remove.

Fig 1: Removing Door Sill Cover Strip With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace faulty clips (1).

Fit door sill cover strip (2) with preinstalled clips (1).

Fig 2: Identifying Door Sill Cover Strip With Clips

Courtesy of BMW OF NORTH AMERICA, INC.