61 31 083 Removing and installing/replacing switch for unlocking tailgate

Special tools required:

NOTE: Graphic similar!

Lever switch for tailgate unlocking (1) sideways out of A-pillar trim panel (2) using special tool 00 9 323 .

Disconnect associated plug connection and remove switch for unlocking rear lid (1).

Fig 1: Removing Sideways Out Of A-Pillar Trim Panel Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary preliminary work:

Removal:

Release catches (1) on both sides.

Remove switch for rear lid unlocking (2) in direction of arrow.

Fig 1: Identifying Switch For Rear Lid Unlocking

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Join switch for tailgate release (2) in direction of arrow.

NOTE: Ensure correct engagement of latch mechanism (1) on both sides.

Fig 2: Identifying Switch For Rear Lid Unlocking

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: