11 44 000 Removing and installing/replacing oil-to-water heat exchanger (N52T)
WARNING:
Risk of scalding!
Only perform this repair work on an engine that has cooled down.
Only perform this repair work on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste disposal regulations.
Necessary preliminary tasks:
- Drain COOLANT
Release coolant hose (1).
Tightening torque: 11 42 4AZ .
Unfasten screws (2).
Tightening torque: 11 42 3AZ .
Installation note:
Replace all gaskets.
Assemble engine.
Installation note:
BLEEDING INSTRUCTION must be observed without fail.
Fill COOLING SYSTEM .