LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 xDrive28d >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Repair >> Front Seat, Normal, Electric >> 52 14 392 Removing and installing/replacing front left or right crash-active head restraint (from 09/08)

52 14 392 Removing and installing/replacing front left or right crash-active head restraint (from 09/08)

WARNING: Observe SAFETY REGULATIONS when handling airbag modules.
Incorrect handling may result in triggering of the crash-active headrest and thereby cause injury.

Switch off the ignition!

Necessary preliminary tasks: 

Starting situation: 

Head restraint is in the crash position after being triggered.

A triggered head restraint can be recognized by the padded section which has moved upwards.

Fig 1: Identifying Activated Head Restraint
G08486395Courtesy of BMW OF NORTH AMERICA, INC.

Unclip PLUG CONNECTION (1) for crash-active headrest from holder.

Unfasten plug connection (1) and disconnect.

Fig 2: Disconnect Plug Connection
G06204261Courtesy of BMW OF NORTH AMERICA, INC.

Lever out sealing cap (1).

Fig 3: Identifying Protective Cap
G06204262Courtesy of BMW OF NORTH AMERICA, INC.

Detach omega clip (1).

Fig 4: Detaching Omega Clip
G06204263Courtesy of BMW OF NORTH AMERICA, INC.

Press latch mechanism (1) and lift out head restraint (2).

Fig 5: Lifting Out Head Restraint
G05779475Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals