65 11 080 Removing and installing/replacing radio receiver

Special tools required:

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

IMPORTANT: Carry out installation in a dust-free workshop area only.
To avoid damage, do not touch or dirty the display field.

Necessary preliminary work:

Insert special tool 00 9 341 as illustrated.

Lever trim cover (1) slightly forward and unclip.

Fig 1: Removing Trim Cover Using Special Tool 00 9 340

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip LED (1).

Remove cover (2).

Installation note:

Retaining lugs and clips must not be damaged.

Fig 2: Locating Cover Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Pull radio receiver with operating unit cover (1) out toward the front.

Unlock associated plug connections and disconnect.

Fig 3: Locating Radio Receiver With Operating Unit Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.