41 00... Frame Reference Body Dimension

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Dimensions in mm.

Dimension tolerances:

≤ 1000 mm ± 1.5 mm
≥ 1000 mm ± 2.5 mm

The checkpoints shown serve to check the body and the set of attachments.

The specified dimensions always refer to the center point of the bore hole/screw.

Under Body View 1

Fig 1: Under Body Frame Reference Dimensions And Measurement Points (Under Body View 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Under Body View 2

Fig 2: Under Body Frame Reference Dimensions And Measurement Points (Under Body View 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Engine Compartment Under Body Frame Reference Dimensions And Measurement Points (Front End)

Courtesy of BMW OF NORTH AMERICA, INC.

View, B-Pillar

Courtesy of BMW OF NORTH AMERICA, INC.

Applicable to E70 only:

measurement "a" =1639 mm between screw-on points of door brakes.

Applies only to E71/E72:

measurement "a" =1636 mm between screw-on points of door brakes.

Applies only to F15/F15:

measurement "a" =1638 mm between screw-on points of door brakes.