Importing the release key to Progman

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

After < The following release keys must be imported x Code x not imported > is displayed in Progman, press the < Import > button.
After the < Please insert a data carrier with release key > is displayed, insert the DVD with the release keys into the drive of the SSS and press the < Next > button.
The < The following release key files must be imported x Code x imported > display appears again Now press the < End of Import > button.
The processing of the action plan will continue.

If the release keys cannot be imported and the processing of the action plan continues, the result will be a function change experienced by the customer.

The expanded speech processing (SA 620) will no longer be available after programming with Progman version 25.0 and higher.

The processing of the action plan will not be impacted. The loading of the release key can be repeated at a later time during a new Progman session with the < Load software > button.

When the release by DVD for SweepingTechnologies fails, the release key may be ordered for all vehicles from the parts catalogue.

The release key will be ready for download after placing an order for a ZIP document (compressed data format) via BMW.

Please contact the technical support for your market for any questions you may have.