LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Functional Description - Information & Entertainment Systems) >> Information & Entertainment System - Functional Description >> Functional description of integrated Bluetooth check >> Diagnosis instructions >> Termination of the procedure during the Bluetooth test

Termination of the procedure during the Bluetooth test

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

If the procedure is not performed until its finish, but is cancelled during the Bluetooth test, the Integrated Measurement Interface Box (IMIB) will remain in the internal program for the Bluetooth test. In order to be able to use the Integrated Measurement Interface Box (IMIB) again afterwards, it must be reset via the {EXIT} button on the Integrated Measurement Interface Box (IMIB). This must be especially considered if the Bluetooth test is repeated again.

scientia non olet · About LEMON Manuals