Interruption of test in progress

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

The ongoing test can be stopped by the user by pressing the < Abort > button. Whenever the test is stopped, no result is then available. When this is the case, a message will appear on the IMIB display. The entire test must be run through in order to obtain a test result.

Fig 1: Pressing Abort Button Screen

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Pressing Start Button Screen

Courtesy of BMW OF NORTH AMERICA, INC.