Status messages
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
The following status messages can appear in the list on the display of the IMIB:
- TESTING = Test is active
- PAUSING = Cooling-down period within the IMIB
- CONNECTING = Negotiation between the two subscribers (IMIB and vehicle) while connecting
- ABORTED = Aborted by user
- COMPLETED = Test completed
- IDLE = Idle state
- FAILED = Test was unsuccessful
- VBUSNOTPRESENT = Attempt to make a data connection without USB voltage (e.g. cable not connected)
- VOLTAGETOOLOW = USB voltage less than 4.75V
- UNKNOWN = Unknown error
This information must be included in the diagnosis depending on requirements.