Test of the HIP module

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

The HIP module is a component that can be replaced separately in the CCC.

In the test module "CCC navigation", a test is started to determine whether the HIP module is functional. The following points must be borne in mind during the diagnosis.

Malfunctions can be remedied by briefly disconnecting the CCC from the voltage supply.
After replacement of the HIP module, the vehicle must be driven for at least 15 minutes with good GPS reception to find the current position. During this calibration, no location display is possible.