Diagnosis instructions
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
The following test modules are available for testing components:
- Zero-gear sensor
- Brake vacuum sensor
- Clutch switch
- MSA button (network connection to center console control panel)
- MSA door contact (network connection with FRM)
- DC/DC converter (network connection with JBE)
- MSA power management (information on the onboard electrical system, along with on the last switch-off inhibitor or activation request source, obtained from power management)
The "Read out AV memory" service function can be used to read out the history of the most recently stored switch-off inhibitors.