Diagnosis instructions

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Follow the instructions for service functions!

The diagnosis system provides the following service function for the all-round vision camera (TRSVC):

Calibrating and "teaching" system for all-round vision camera

Path: Service functions > Driver assistance > All-round vision camera

Depending on the vehicle equipment, all installed cameras are automatically learned in with this service function and the cameras can then be calibrated individually. The bumper camera cannot be calibrated.

NOTE: New update procedure!

Automatic calibration is now available as a new update procedure to the reversing camera and the exterior mirror camera. Following replacement each camera must be reinitializes ("learning" function). The service function provides an automatic calibration. Manual calibration using the special tool is no longer required. On vehicles with an all-round vision camera manufactured prior to 03/2011 automatic calibration can also be activated in a programming session.