65 11 075 Removing and installing/replacing DVD changer

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Follow INSTRUCTIONS FOR HANDLING OPTICAL FIBRES .

Open glovebox.

Release trim (1) at clips (2).

Installation:

Replace damaged clips (2):

Fig 1: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull out DVD changer (2) and disconnect associated plug connection.

Tightening torque 65 52 5AZ .

Fig 2: Identifying DVD Changer And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) on both sides and remove bracket (2).

Tightening torque 65 52 1AZ .

Fig 3: Identifying Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.