66 50 040 Removing and installing/replacing exterior mirror camera

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove PROTECTIVE CAP FROM EXTERIOR MIRROR

Release screws (1).

Detach exterior mirror camera (2) from protective cap (3).

Fig 1: Identifying Exterior Mirror Camera, Protective Cap, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Calibration:

Calibration is performed via BMW diagnosis system:
- Service function
- Body
- All-round vision camera
- Calibration of all-round vision camera