27 10 720 Replacing Servomotor (ATC 700)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After replacement, the "Repair" service function must be carried out with in the BMW diagnosis system.

Necessary preliminary tasks:

REMOVE TRANSMISSION CROSS-MEMBER .

Disconnect plugs (1) and (2).

Tightening torque: 27 00 14AZ .

Fig 1: Servomotor (ATC 700) Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove servomotor from transfer box.

Tightening torque: 27 00 13AZ .

Fig 2: Servomotor From Transfer Box Screws

Courtesy of BMW OF NORTH AMERICA, INC.