63 13 200 Removing and installing/replacing front left or right auxiliary turn indicator, M series

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Carefully unlock the chrome inlay (1) using a suitable tool in areas (2).

Fig 1: Unlocking Chrome Inlay Using Suitable Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove chrome inlay (2) in direction of arrow.

Fig 2: Removing Chrome Inlay

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Remove turn indicator insert (2) from chrome inlay (3) in direction of arrow.

Installation note:

The chrome inlay (1) must be replaced.

Make sure cables are correctly routed and fitted.

Fig 3: Removing Turn Indicator Insert From Chrome Inlay

Courtesy of BMW OF NORTH AMERICA, INC.