63 14 080 Removing and installing/replacing front reflector

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 322

NOTE: Repair work shown on the E71 by way of example, deviations in detail are possible in other models.

Lever out front rear reflector (1) from front side panel (2) with special tool 00 9 322 in direction of arrow (A) and remove in direction of arrow (B).

Installation note:

Locking spring (3) must not be damaged or missing.

Fig 1: Removing Front Rear Reflector From Front Side Panel Using Special Tool 00 9 322

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Feed rear reflector (1) first in front area into front side panel and then press down in rear area.

Make sure front reflector (1) is correctly engaged on front side panel.

Fig 2: Installing Front Reflector

Courtesy of BMW OF NORTH AMERICA, INC.