52 26... Removing and installing middle fold adapter trim

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove MIDDLE FOLD TRIM
Remove REAR PANEL TRIM
Partially remove SEAT COVER

Release screw (1).

Fig 1: Locating Adapter Trim Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Identifying Adapter Trim Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim in marked area.

Fig 3: Removing Adapter Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Feed trim (2) in upward direction out of seat mechanism.

Fig 4: Removing Adapter Trim

Courtesy of BMW OF NORTH AMERICA, INC.