22 11 100 Replacing right engine support arm (N54, N55)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure ENGINE IN INSTALLATION POSITION
Remove catalytic converter for cylinder 1-3 (N54 only)

OBSERVE SAFETY INFORMATION ON RAISING THE VEHICLE

NOTE: The engine must be lowered back down in order to undo the lower engine support arm bolts.

Release screws.

Tightening torque: 22 11 3AZ .

Remove engine support arm.

Fig 1: Locating Engine Support Arm Screws

Courtesy of BMW OF NORTH AMERICA, INC.