22 11 011 Replacing left engine mount (N63, S63)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Secure . See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N63) engine in installation position.
Lower FRONT AXLE SUPPORT .

Release screws (1).

Tightening torque: 22 11 1AZ .

Remove engine mount (2).

Fig 1: Identifying Screws Of Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Holes (1) in engine mount must point to center of vehicle.

Fig 2: Identifying Holes In Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.