31 00... Front Axle + Steering: Wheel/Chassis Alignment Check Must Be Carried Out After The Following Work

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Axle Components

Courtesy of BMW OF NORTH AMERICA, INC.

A wheel/chassis alignment check must be carried out after the following work:

Release of following screw/bolt connections:
- Steering gear to front axle carrier
- Lower wishbone to front axle support
- Track rod end to track rod
Replacement of following parts:
1. Front axle support
2. Steering gear
3. Swivel bearing
4. Track rod end
5. Lower control arm/rubber mount
6. Track rod
7. Gaiter (if the tie rod end has to be screwed off)