51 24 010 Adjusting tailgate catch for tailgate upper section

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Precondition:

UPPER TAILGATE SECTION correctly adjusted to fit
TAILGATE CATCH for lower tailgate section correctly adjusted

Slacken screws for Automatic Soft Close system.

Adjust Automatic Soft Close system and tighten down screws.

Close tailgate, check 41 00... BODY GAP DIMENSIONS . and checking closing comfort.

If necessary, repeat procedure.

NOTE: When tailgate is closed, Automatic Soft Close system must not make contact with or brush against tailgate lock. Look out for scratch marks.

Fig 1: Locating Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Version with reversing camera:

After adjusting, check reversing camera and if necessary RECALIBRATE .