51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Necessary preliminary tasks:

Remove FRONT DOOR SILL COVER STRIP
Remove TRIM PANEL FOR PEDAL MECHANISM

Detach edge protection (1) in area of footwell trim.

Release screw (2) and remove release lever (3).

Fig 1: Removing Release Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Unclamp clamps (2) with special tool 00 9 317 .

Remove trim panel (3) towards inside.

Fig 2: Removing Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clamps (1) on trim panel (2) must not be damaged.

Fig 3: Identifying Clamps On Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.