51 34 425 Removing and installing/replacing trim on window frame of rear door, rear left or right

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Detach seal (1) from trim (3).

Release screws (2).

Remove trim (3) towards rear.

Fig 1: Identifying Seal, Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Trim (1) must be located over side window frame (2).

Ensure seal (3) is correctly seated.

Fig 2: Identifying Side Window Frame, Trim And Seal

Courtesy of BMW OF NORTH AMERICA, INC.