LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 375 (Body Equipment - Repair) >> Rear Lid Trim Panel >> 51 49 000 Removing and installing/replacing panel for rear lid

51 49 000 Removing and installing/replacing panel for rear lid

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1) in recessed handle.

Feed back handle (2) of emergency unlocking.

Release panels (3) at clips (4) and remove.

Fig 1: Identifying Panels, Handle, Clips, And Screws
G04791881Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty clips (1 and 2).

Make sure all clips are installed in correct position.

  1. Grey clip
  2. White clip
    Fig 2: Identifying Grey Clips And White Clips
    G04791882Courtesy of BMW OF NORTH AMERICA, INC.