51 22 300 Removing and installing/replacing outer weather strip on rear door on left or right
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
If reusing the existing weather strip (1), make sure it is not bent.
Lever out weather strip (1) with special tool 00 9 324
(starting at B-pillar).
Simultaneously lift out weather strip (1) with special tool 00 9 317
in the vicinity of the B-pillar.
Courtesy of BMW OF NORTH AMERICA, INC.