51 16 240 Removing and installing/replacing rear storage box

Special tools required: 

• 00 9 317

Necessary preliminary tasks: 

• Remove SIDE CARPET FROM STORAGE COMPARTMENT  on left and right
• Remove CENTER CONSOLE COVER (GEAR SELECTOR SWITCH) 
• Remove AV CONNECTING SOCKET COVER
• Version with rear-cabin monitor: 

  Remove COVER FROM REAR CABIN MONITOR AT FRONT

• Version with eject box: 

Remove EJECT BOX

Version without rear cabin monitor: 

Lever cover (1) out of center console in the direction of arrow with special tool 00 9 317 .

Installation note: 

Replace faulty clamps (2).

Fig 1: Removing Trim From Rear Center Console (Version Without FD)

Courtesy of BMW OF NORTH AMERICA, INC.

Release left and right screws (1).

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and raise storage box (2).

If necessary, disconnect plug connection for STORAGE BOX LED .

Remove storage box (2).

Fig 3: Identifying Screws And Storage Box

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remove CENTER ARMREST FROM STORAGE COMPARTMENT  on left and right

If necessary, remove STORAGE BOX LED .

Replacement before 05/2011: 

Break out ribs (1) with pliers.

Fig 4: Identifying Storage Box Ribs

Courtesy of BMW OF NORTH AMERICA, INC.