51 47 128 Removing and installing/replacing trim panel for luggage compartment floor

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Push retaining spring (1) to end of gas pressure spring.

Remove gas pressure spring from ball head.

Firmly pull luggage compartment floor (2) towards rear and thereby disengage from hinges (3).

NOTE: Removal is easier the flatter the luggage compartment floor (2) is positioned.

Fig 1: Identifying Luggage Compartment Floor, Retaining Spring, And Hinges

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove HANDLE ON TRIM PANEL FOR LUGGAGE COMPARTMENT FLOOR .

Release screws (1).

Remove hinge (2).

Fig 2: Identifying Hinge And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mounting plate (2).

Fig 3: Identifying Screws And Mounting Plate

Courtesy of BMW OF NORTH AMERICA, INC.