51 47 105 Removing and installing/replacing trim on D-pillar at bottom left or right
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
Unclip cover (1) in direction of arrow.
Installation note:
Catches on trim (1) must not be damaged.
Release screws (1).
Detach trim (2) at clip (3) and remove inwards.
Installation note:
If necessary, replace faulty clip (3).