16 19 120 Removing and installing/replacing SCR heating power switch
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Avoid eye contact (safety goggles)!
Urea/water mixture can escape when parts carrying urea/water mixture are released. Have a collecting vessel ready.
Observe country-specific waste disposal regulations.
Avoid skin contact (wear gloves)!
Avoid eye contact (safety goggles)!
Urea/water mixture can escape when parts carrying urea/water mixture are released. Have a collecting vessel ready.
Observe country-specific waste disposal regulations.
Necessary preliminary work:
- Remove right WHEEL ARCH COVER front section
Disconnect plug connection (1).
Disconnect plug connection (2).
Turn power switch (3) a 1/4 turn in direction of arrow and remove.