16 19 110 Removing and installing/replacing evaluation unit on active reservoir
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Avoid eye contact (protective goggles)!
Urea/water mixture can escape when parts carrying urea/water mixture are released. Have a collecting container ready.
Observe country-specific waste-disposal regulations.
Avoid skin contact (wear gloves)!
Avoid eye contact (protective goggles)!
Urea/water mixture can escape when parts carrying urea/water mixture are released. Have a collecting container ready.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
- Remove right WHEEL ARCH COVER front section
Disconnect plug connection (1).
Turn evaluation unit (2) a 1/4 turn in direction of arrow and remove.