16 12 010 Removing and installing or replacing carbon canister
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- REMOVE rear right wheel arch panel
NOTE:
With vehicles designed for China, a carbon canister may be installed in the US VERSION WITH DMTL .
Unlock snap fasteners (1) and disconnect vent lines.
Release screws (2) and remove carbon canister (3).
Installation note:
Tightening torque: 16 13 1AZ .