11 00 Mounting engine on assembly stand (N63)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 2 300
11 0 020
11 8 930
11 8 931
11 8 932

WARNING:

Remove engine using special tool 11 0 020 and suitable lifting gear and mount on special tool 11 8 930 . Engine weighs approx. 280 kg.

Necessary preliminary tasks:

Remove ENGINE .
Clean contact surfaces.

Use special tool 11 8 931 to mount special tool 11 8 932 .

Insert screws (1 and 2).

Tightening torque: 11 11 9 to 10AZ .

Fig 1: Identifying Special Tool And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 11 8 931 to mount engine on special tool 00 2 300 .

Tightening torque: 11 11 11AZ .

Fig 2: Identifying Engine On Assembly Stand

Courtesy of BMW OF NORTH AMERICA, INC.