64 11 842 Replacing actuator drive for right footwell flap
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove INSTRUMENT PANEL TRIM
Disconnect plug connection (1).
Release screws (2) and remove servomotor.
Replacement:
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and air conditioning function
- Flap motors
- Re-address flap motors