34 00 022 Minimum Brake Disc Thickness
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
New brake pads may only be fitted if the brake disc thickness is greater than the minimum brake disc thickness (MIN TH).
Test specification 29 Limit value for brake disc thickness:
- BMW, MINI and Rolls-Royce vehicles: nominal dimension minus 2.4 mm
- Vehicles of BMW Motorsport GmbH (perforated brake disc): nominal dimension minus 1.6 mm
This limit dimensions is also applicable to perforated brake discs which are fitted on BMW AG vehicles as optional accessories!
- Minimum thickness of brake pads: 3 mm.
This corresponds to the when the pad wear indicator lights up and applies to all BMW Group vehicles.
NOTE: The type-specific limit dimensions are published for all BMW Group vehicles in the test specifications within the framework of the system data deliveries.
They can be read out in the Technical Data via the BMW Online System "www.bmw-service.com".
Brake disc thickness, front brakes:
- BMW 1-Series, E8X
- BMW 3-Series, E46
- BMW 3-Series, E9X
- BMW 5-Series, E39
- BMW 5-/6-Series, E6X
- BMW Model series Z4, E85, E86
- BMW Model series X3, E83
- BMW Model series X5, E53
- BMW MODEL SERIES X5/X6, E70, E71
- BMW 7 Model series, E6X
- BMW 7 Model series, F01
- BMW Model series Z8, E52
- Other BMW Model series
- BMW Model series MINI
- Model series Rolls-Royce
Brake disc thickness, rear brakes:
- BMW 1 Model series, E8X
- BMW 3 Model series, E46
- BMW 3 Model series, E9X
- BMW 5 Series, E39
- BMW 5/6 Model series, E6X
- BMW Model series Z4, E85, E86
- BMW Model series X3, E83
- BMW Model series X5, E53
- BMW MODEL SERIES X5/X6, E70/E71
- BMW 7 Model series, E6X
- BMW 7 Model series, F01
- BMW Model series Z8, E52
- Other BMW Model series
- BMW Model series MINI
- Model series Rolls-Royce