72 11 101 Removing And Installing/Replacing Rear Center Seat Belt (Buckle And Anchor)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Partially remove BACKREST COVER .
Release screw (1).
Tightening torque: 72 11 26AZ .
Remove end fitting.
Installation:
End fitting is coded against incorrect assembly.
Unclip retainers (1) for belt pin on left and right.
Remove belt pin (2).
Unscrew nut (3).
Tightening torque: 72 11 25AZ .
Remove retractor mechanism.
Installation:
Retractor mechanism is coded against incorrect assembly.
Feed anchor fitting out of backrest cover and backrest frame.