72 12 050 Removing And Installing Side Airbag (Front Seat)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe safety regulations for handling airbag modules and pyrotechnical seat belt tensioners.
Incorrect handling can cause airbags to trigger, resulting in serious injuries.

Necessary preliminary tasks:

Clamp off BATTERY NEGATIVE LEAD .
Partially detach backrest cover . See REPLACING BACKREST COVER FOR LEFT OR RIGHT FRONT SEAT (COMFORT) or REPLACING BACKREST COVER FOR LEFT OR RIGHT FRONT SEAT (NORMAL/SEMI-ELECTRIC) .

Remove cover (1).

Fig 1: Side Airbag Cover (Front Seat)

G04792877

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock PLUG CONNECTION (1) and disconnect.

Release screws.

Installation:

Replace screws.

Tightening torques: 72 12 06AZ .

Fig 2: Side Airbag Plug Connection

G04792878

Courtesy of BMW OF NORTH AMERICA, INC.

Remove airbag module (1) from inner bag (2).

Installation:

Pull inner bag (2) fully over airbag module (1) and screw brackets.

Fig 3: Airbag Module And Inner Bag

G04792879

Courtesy of BMW OF NORTH AMERICA, INC.