LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Windscreen Washer System >> 61 71... Cable adjustment, car wash hose pipe

61 71... Cable adjustment, car wash hose pipe

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: On vehicles with production date up to 11/2010, engine compartment lid, cable and hose pipe for car wash are installed as replacements as of 11/2010. In this case, the cable for car wash hose pipe must be adjusted.

(1): Cable with car wash hose pipe from 11/2010

(3): Cable with car wash hose pipe up to 11/2010

Extend cable (2) by piece (A) so that connector (1) is level with connector (3).

Required parts from BMW Parts Department:

Fig 1: Adjusting Car Wash Hose Pipe
G08530659Courtesy of BMW OF NORTH AMERICA, INC.
  1. 2 x socket contact 0 005 199
  2. 2 x butt connector 8 353 746
  3. 2 x heat-shrink tubing 1 379 833