61 62 030 Removing and installing/replacing wiper arm on rear window

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 6 060

Fold open protective cap (1) in direction of arrow.

Release nut underneath.

Tightening torque 61 62 2AZ .

Fig 1: Folding Protective Cap Open

Courtesy of BMW OF NORTH AMERICA, INC.

Detach wiper arm (1) with special tool 61 6 060.

Fig 2: Detaching Wiper Arm Using Special Tool (61 6 060)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Before fitting wiper arm, allow wiping system to run two wipe cycles into park position.

Adjust MEASUREMENT (A) between wiper arm and rear window edge.

Fig 3: Identifying Dimension Between Wiper Arm And Rear Window Edge

Courtesy of BMW OF NORTH AMERICA, INC.