61 31 336 Removing and installing/replacing trim for gear selector switch

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove CENTER CONSOLE TRIM

Release screws (1) and raise trim for gear selector switch (2) slightly. Tightening torque 61 31 3AZ .

Disconnect plug connection underneath and remove trim for gear selector switch (2).

Fig 1: Identifying Gear Selector Switch Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove SWITCH FOR ELECTROMECHANICAL PARKING BRAKE .