61 31 135 Removing and installing/replacing headphones connection socket

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

Unclip trim (1) from center console using special tool 00 9 340 .

Installation:

Retaining lugs on trim (1) must not be damaged or missing.

Make sure trim (1) is correctly engaged on center console.

Fig 1: Removing Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Press together retaining lugs (2) and feed headphones connection socket in direction of arrow out of trim (3).

Installation:

Make sure headphones connection socket is correctly seated in trim (3).

Fig 2: Identifying Trim, Plug Connection, And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.