LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Switch >> 61 31 037 Removing and installing/replacing light control unit

61 31 037 Removing and installing/replacing light control unit

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Press out light control unit (1) from inside.

Fig 1: Removing Light Control Unit
G06213469Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove light control unit.

Installation: 

Make sure retainers (2) are correctly seated on trim of light control unit.

If necessary, replace faulty retainers.

Fig 2: Identifying Plug Connection And Retainers
G06213470Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Release screws (1).

Remove light control unit (2) from trim (3).

Fig 3: Identifying Light Control Unit, Trim, And Screws
G06213471Courtesy of BMW OF NORTH AMERICA, INC.