61 31 011 Removing and installing/replacing volute spring cassette

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove STEERING-COLUMN SWITCH CLUSTER

Unlock catch (1) and remove volute spring cassette (2) in direction of arrow from steering column switch cluster (3).

Fig 1: Removing Volute Spring Cassette

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Do not turn ring (1).
Also turning ring (1) through 360° is not permitted!
Secure ring (1) against unauthorized turning.

Installation:

Marking (2) must line up with marking (3).

Fig 2: Identifying Ring And Markings

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Drive pin (1) of volute spring (2) must line up correctly with opening (3) in inner ring of steering column switch cluster.

Fig 3: Installing Volute Spring Cassette

Courtesy of BMW OF NORTH AMERICA, INC.