61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ

Manufactured by AMP:  The following contact types without strand sealing can be fitted in the connector housings:

• MQS (Micro Quadlock System)
• MPQ, width 2.8 mm (Micro Power Quadlock)
• MPQ, width 5.2 mm (Micro Power Quadlock)

Socket housing, 5-pin (Hybrid System MQS/MPQ) 

Raise fastener (1) over retaining lug (2) and pull off from contact carrier (3).

Fig 1: Identifying Retaining Lug, Fastener, And Contact Carrier - 5-Pin (Hybrid System MQS/MPQ)

Courtesy of BMW OF NORTH AMERICA, INC.

Socket housing, 8-pin (MQS): 

Raise fastener (1) over retaining lug (2) and pull off from contact carrier (3).

Fig 2: Identifying Fastener, Retaining Lug, And Contact Carrier - 8-Pin (MQS)

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook (1) of contact and pull cable with contact as far as secondary lock (2).

Fig 3: Pulling Wire With Socket Contact Up To Secondary Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook in secondary lock (1) again and pull cable with contact (2) completely out of contact carrier (3).

Fig 4: Pulling Cable With Socket Contact Completely Out Of Contact Carrier

Courtesy of BMW OF NORTH AMERICA, INC.