LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Inline plugs, 8-, 12-pin, System D2.5

61 13... Inline plugs, 8-, 12-pin, System D2.5

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Move connector upper section (1) and the connector lower section (2) against each other in direction of arrow.

Fig 1: Moving Upper And Lower Section Of Connector Against Each Other
G08509682Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back arrester hook (3) of appropriate contact and pull out cable with contact.

Fig 2: Press Down Retaining Hook Using Special Tool
G08509683Courtesy of BMW OF NORTH AMERICA, INC.